feat: align motrix-style download UI/actions and stabilize aria2 ops

src-tauri/resources/engine/win32/ia32/aria2.conf

@@ -0,0 +1,91 @@
+###############################
+# Motrix Windows Aria2 config file
+#
+# @see https://aria2.github.io/manual/en/html/aria2c.html
+#
+###############################
+
+
+################ RPC ################
+# Enable JSON-RPC/XML-RPC server.
+enable-rpc=true
+# Add Access-Control-Allow-Origin header field with value * to the RPC response.
+rpc-allow-origin-all=true
+# Listen incoming JSON-RPC/XML-RPC requests on all network interfaces.
+rpc-listen-all=true
+
+
+################ File system ################
+# Save a control file(*.aria2) every SEC seconds.
+auto-save-interval=10
+# Enable disk cache.
+disk-cache=64M
+# Specify file allocation method.
+file-allocation=none
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
+# Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
+save-session-interval=10
+
+
+################ Task ################
+# Exclude seed only downloads when counting concurrent active downloads
+bt-detach-seed-only=true
+# Verify the peer using certificates specified in --ca-certificate option.
+check-certificate=false
+# If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
+# without getting a single byte, then force the download to fail.
+max-file-not-found=10
+# Set number of tries.
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
+# aria2 does not split less than 2*SIZE byte range.
+min-split-size=1M
+# Send Accept: deflate, gzip request header.
+http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
+
+
+################ BT Task ################
+# Enable Local Peer Discovery.
+bt-enable-lpd=true
+# Requires BitTorrent message payload encryption with arc4.
+# bt-force-encryption=true
+# If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
+bt-hash-check-seed=true
+# Specify the maximum number of peers per torrent.
+bt-max-peers=128
+# Try to download first and last pieces of each file first. This is useful for previewing files.
+bt-prioritize-piece=head
+# Removes the unselected files when download is completed in BitTorrent.
+bt-remove-unselected-file=true
+# Seed previously downloaded files without verifying piece hashes.
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
+# Set host and port as an entry point to IPv4 DHT network.
+dht-entry-point=dht.transmissionbt.com:6881
+# Set host and port as an entry point to IPv6 DHT network.
+dht-entry-point6=dht.transmissionbt.com:6881
+# Enable IPv4 DHT functionality. It also enables UDP tracker support.
+enable-dht=true
+# Enable IPv6 DHT functionality.
+enable-dht6=true
+# Enable Peer Exchange extension.
+enable-peer-exchange=true
+# Specify the string used during the bitorrent extended handshake for the peer's client version.
+peer-agent=Transmission/3.00
+# Specify the prefix of peer ID.
+peer-id-prefix=-TR3000-

src-tauri/resources/engine/win32/x64/aria2.conf

@@ -0,0 +1,91 @@
+###############################
+# Motrix Windows Aria2 config file
+#
+# @see https://aria2.github.io/manual/en/html/aria2c.html
+#
+###############################
+
+
+################ RPC ################
+# Enable JSON-RPC/XML-RPC server.
+enable-rpc=true
+# Add Access-Control-Allow-Origin header field with value * to the RPC response.
+rpc-allow-origin-all=true
+# Listen incoming JSON-RPC/XML-RPC requests on all network interfaces.
+rpc-listen-all=true
+
+
+################ File system ################
+# Save a control file(*.aria2) every SEC seconds.
+auto-save-interval=10
+# Enable disk cache.
+disk-cache=64M
+# Specify file allocation method.
+file-allocation=falloc
+# No file allocation is made for files whose size is smaller than SIZE
+no-file-allocation-limit=64M
+# Save error/unfinished downloads to a file specified by --save-session option every SEC seconds.
+save-session-interval=10
+
+
+################ Task ################
+# Exclude seed only downloads when counting concurrent active downloads
+bt-detach-seed-only=true
+# Verify the peer using certificates specified in --ca-certificate option.
+check-certificate=false
+# If aria2 receives "file not found" status from the remote HTTP/FTP servers NUM times
+# without getting a single byte, then force the download to fail.
+max-file-not-found=10
+# Set number of tries.
+max-tries=0
+# Set the seconds to wait between retries. When SEC > 0, aria2 will retry downloads when the HTTP server returns a 503 response.
+retry-wait=10
+# Set the connect timeout in seconds to establish connection to HTTP/FTP/proxy server. After the connection is established, this option makes no effect and --timeout option is used instead.
+connect-timeout=10
+# Set timeout in seconds.
+timeout=10
+# aria2 does not split less than 2*SIZE byte range.
+min-split-size=1M
+# Send Accept: deflate, gzip request header.
+http-accept-gzip=true
+# Retrieve timestamp of the remote file from the remote HTTP/FTP server and if it is available, apply it to the local file.
+remote-time=true
+# Set interval in seconds to output download progress summary. Setting 0 suppresses the output.
+summary-interval=0
+# Handle quoted string in Content-Disposition header as UTF-8 instead of ISO-8859-1, for example, the filename parameter, but not the extended version filename*.
+content-disposition-default-utf8=true
+
+
+################ BT Task ################
+# Enable Local Peer Discovery.
+bt-enable-lpd=true
+# Requires BitTorrent message payload encryption with arc4.
+# bt-force-encryption=true
+# If true is given, after hash check using --check-integrity option and file is complete, continue to seed file.
+bt-hash-check-seed=true
+# Specify the maximum number of peers per torrent.
+bt-max-peers=128
+# Try to download first and last pieces of each file first. This is useful for previewing files.
+bt-prioritize-piece=head
+# Removes the unselected files when download is completed in BitTorrent.
+bt-remove-unselected-file=true
+# Seed previously downloaded files without verifying piece hashes.
+bt-seed-unverified=false
+# Set the connect timeout in seconds to establish connection to tracker. After the connection is established, this option makes no effect and --bt-tracker-timeout option is used instead.
+bt-tracker-connect-timeout=10
+# Set timeout in seconds.
+bt-tracker-timeout=10
+# Set host and port as an entry point to IPv4 DHT network.
+dht-entry-point=dht.transmissionbt.com:6881
+# Set host and port as an entry point to IPv6 DHT network.
+dht-entry-point6=dht.transmissionbt.com:6881
+# Enable IPv4 DHT functionality. It also enables UDP tracker support.
+enable-dht=true
+# Enable IPv6 DHT functionality.
+enable-dht6=true
+# Enable Peer Exchange extension.
+enable-peer-exchange=true
+# Specify the string used during the bitorrent extended handshake for the peer's client version.
+peer-agent=Transmission/3.00
+# Specify the prefix of peer ID.
+peer-id-prefix=-TR3000-